Awaiting product image

New Holland Woodruff Key Part # 80768

$2.34

KEY, WOODRUFF

Out of stock

Add to Wishlist

WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov

If a replacement part # is not listed in the description below, contact us and our parts department can research availability on this part.

SKU: 80768 Category:

Description

Part #: 80768

Replaces: V109580, 74183S

Replaced By: 47471

Models Used On:

CIH AG

FORAGE EQ (PT FORAGE HARV)
  • CASE IH PULL-TYPE FORAGE HARVESTER:

    FHX300 (11/01-12/99)

BALERS (ROUND BALERS)

  • CASE IH ROUND BALER - NORTH AMERICA:

    RB455 (1/14-3/15); RB465 (11/13-1/15)

  • CASE IH ROUND BALER:

    RB564 (7/07-1/14); RB454 (7/07-1/14); RB464 (7/07-1/14)

BALERS (SQUARE BALERS)

  • SMALL SQUARE BALER:

    SB541C (9/09-12/99); SB541 (9/08-12/99); SB531 (9/08-12/99); SB521 (8/08-9/18)

HARV EQ (HEADERS)

  • DRAPER HEADER:

    3162 (11/11-12/99); 3152 (11/11-12/18)

CROP PROD (TILLAGE)

  • INTERNATIONAL HARVESTER TANDEM DISK HARROW:

    135 (1/57-12/81)

  • INTERNATIONAL HARVESTER CULTIVATOR:

    268 (1/61-12/69)

TRACTORS (AG)

  • CASE TRACTOR (S/N 8656925 & AFTER):

    470 (1/70-12/72)

CROP PROD (PLANTING & SEEDING EQ)

  • MCCORMICK-INTERNATIONAL 6-ROW PLANTER:

    658 (1/64-12/66)

CROP PROD (APPLICATION EQ)

  • INTERNATIONAL HARVESTER FERTILIZER UNIT:

    277 (1/48-12/61)

NH AG

FORAGE EQ (PT FORAGE HARV)
  • NH PULL TYPE FORAGE HARVESTER:

    FP240 (9/99-7/20); FP230 (1/00-6/13); 790 (4/87-7/14); 900 (7/84-9/99); 718 (7/75-12/96); 1600 (7/82-7/86); 782 (7/78-7/84); 892 (7/78-7/84); 890 (7/73-7/80); 770 (7/71-7/79); S717 (7/68-7/74); 880 (7/67-7/73); 717 (7/64-7/67)

  • EXTENDIBLE TONGUE KIT - 1968:

    20CB9423 (1/68-12/81)

  • ROCKING BOLSTER KIT.:

    20CB9255 (1/68-12/81)

  • EXTENDING TONGUE KIT:

    20CB8600 (1/68-12/81)

  • PTO CONVERSION KIT 1000 TO 540 RPM FIELD INSTALLATION:

    4-560596 (1/70-12/72)

  • PTO CONVERSION KIT, 540 TO 1000 RPM FIELD INSTALLATION:

    4-560595 (1/70-12/72)

  • GEAR KIT 35 & 15T, 1/8" THEORETICAL LENGTH OF CUT:

    4-548785 (1/70-12/72)

  • JACK STAND KIT REQ. 4-543336 OR 4-543678:

    4-543330 (1/70-12/72)

  • FORD FORAGE HARVESTER:

    680-SERIES (1/70-12/72); 605-SERIES (1/57-12/61); 14-43 (1/53-12/55); 14-44 (1/54-12/54)

  • DRIVE LINE 1000 RPM PTO FRONT JOINT ASSY. & HD. GEAR BOX:

    4-567405 (1/70-12/72)

  • DRIVE LINE 540 RPM PTO FRONT JOINT ASSY. HD. GEAR BOX.:

    4-567404 (1/70-12/72)

  • FORAGE HARVESTER, BASIC UNIT:

    4-566952 (1/70-12/72)

  • NH PULL TYPE FORAGE HARVESTER, AFTER S/N 6300:

    818 (7/59-7/67)

BALERS (ROUND BALERS)

  • ROUND BALER - VARIABLE CHAMBER:

    ROLL-BELT 460 (7/14-8/15); ROLL-BELT 450 (6/14-12/14); ROLL-BELT 440 (11/17-4/19)

  • ROTOR FEEDER:

    PRO-BELT 450 (7/21-12/99); PRO-BELT 460 (7/21-12/99)

  • 25 KNIFE ROTOR CUTTER:

    PRO-BELT 450 (11/21-12/99)

  • ROTOR CUTTER 13 KNIFE:

    PRO-BELT 450 (9/21-12/99); PRO-BELT 460 (11/21-12/99)

  • ROTOR CUTTER 25 KNIFE:

    PRO-BELT 460 (11/21-12/99)

  • NH ROUND BALER:

    BR7050 (7/07-5/17); BR7060 (7/07-2/14); BR7070 (7/07-2/14); BR7090 (7/07-2/14); BR7080 (7/07-2/14); BR750A (9/05-6/07); BR730A (9/05-6/07); BR740A (9/05-6/07); BR770A (9/05-6/07); BR780A (9/05-6/07); BR740 (10/03-7/05); BR730 (7/03-7/05); BR750 (9/03-7/05); BR770 (2/03-7/05); BR780 (7/03-7/05); 638 (6/98-6/02); 648 (8/98-6/02); 678 (2/99-6/02); 688 (8/99-6/02); 658 (8/98-6/02); 654 (1/70-9/98); 644 (9/95-9/98); 634 (9/95-9/98); 664 (9/96-9/98); 650 (2/92-9/95); 660 (12/92-9/95); 630 (4/89-8/95); 855 (11/82-7/91); 849 (5/82-5/85); 847 (12/80-6/84); 858 (9/83-2/84); 852 (9/79-6/82); 851 (8/78-6/82); 846 (11/78-10/80); 850 (7/74-7/78); 845 (12/76-6/78)

  • HESSTON ROUND BALER - U.S. VERSION:

    5820 (1/80-12/97); 5850 (1/80-12/97)

  • NH ROUND BALER - 1992:

    640 (1/92-9/95)

  • NH ROUND BALE FEEDER:

    175F (9/87-2/88)

BALERS (SQUARE BALERS)

  • SMALL SQUARE BALER - 2008:

    BC5070 (11/13-5/15); BC5060 (9/08-11/13)

  • SMALL SQUARE BALER:

    BC5050 (9/08-9/19)

  • HAYLINER SMALL SQUARE BALER:

    BC5070 (9/09-12/09)

  • NH SQUARE BALER:

    570 (1/89-8/08); 565 (7/89-8/08); 575 (7/88-8/08); 515 (1/92-1/96); 505 (1/84-3/91); 426 (9/83-3/91); 316 (1/83-12/89); 311 (7/82-7/88); 326 (7/85-7/88); 320 (1/76-5/84); 500 (10/79-1/83); 420 (1/80-11/82); 425 (11/77-10/82); 315 (1/77-4/82); 310 (1/77-7/81); 430 (12/77-1/80); 273 (7/68-7/77); 286 (8/72-5/77); 283 (8/72-4/77); 276 (7/71-6/76); 290 (1/64-2/76); 278 (7/71-6/75); 282 (8/66-5/72); 277 (11/68-5/72); 285 (11/67-4/72); 275 (1/65-5/71); 269 (8/64-6/68); 272 (7/64-6/68); 281 (8/64-7/66); 65 (8/60-2/65); 271 (8/61-7/64); 280 (8/61-7/64); 270 (8/61-7/63); 99 (2/61-5/63); 98 (4/57-2/60); 78 (7/57-8/58)

  • NH 3-TIE INLINE SQUARE BALER:

    BB900 (10/00-12/04)

  • NH 3-TIE IN-LINE SQUARE BALER:

    585 (1/97-4/99)

  • NH SELF PROPELLED SQUARE BALER:

    1426 (1/82-4/84); 1425 (1/78-5/81); 1283 (8/73-6/77); 1282 (10/66-4/73); 1290 (3/64-2/71); 1281 (12/64-9/66); 1280 (11/61-7/64); 178 (3/58-6/61)

  • 532 SERIES BASIC BALER - WIRE TIE:

    14-412 (1/73-12/82)

  • KIT, BALE CHAMBER WEDGE:

    14-347 (1/69-12/81)

  • PICK-UP ASSEMBLY - 4 BAR W/48 RUBBER TEETH:

    14-363 (1/69-12/81)

  • PICK-UP ASSEMBLY - 6 BAR W/72 STEEL TEETH:

    14-362 (1/69-12/81)

  • PICK-UP ASSEMBLY - 4 BAR W/48 STEEL TEETH:

    14-361 (1/69-12/81)

  • PICK-UP ASSEMBLY - 6 BAR W/72 RUBBER TEETH:

    14-364 (1/69-12/81)

  • KIT, PICK-UP GAUGE WHEEL:

    14-374 (1/69-12/81)

  • 542 SERIES BASIC BALER - TWINE TIE, HEAVY DUTY:

    14-413 (1/73-12/81)

  • 532 SERIES BASIC BALER - TWINE TIE, STANDARD:

    14-411 (1/73-12/81)

  • TIRE & WHEEL ASSEMBLY W/FLOTATION TIRES:

    14-418 (1/73-12/81)

  • TIRE & WHEEL ASSEMBLY W/ REGULAR TIRES:

    14-417 (1/73-12/81)

  • FORD HEAVY DUTY HAY BALER:

    542-SERIES (1/69-12/81)

  • FORD HAY BALER:

    532-SERIES (1/69-12/81); 350 (1/56-12/70); 506-SERIES (1/58-12/70); 540-SERIES (1/58-12/70); 250 (1/54-12/63); 504-SERIES (1/54-12/63); 150 (1/58-12/61); 520-SERIES (1/58-12/61); 509-SERIES (1/58-12/61)

  • 542 SERIES BASIC BALER - WIRE TIE:

    14-414 (1/73-12/79)

  • TONGUE ASSEMBLY - LONG:

    14-358 (1/69-12/75)

  • TONGUE ASSEMBLY - SHORT:

    14-357 (1/69-12/75)

  • KIT, DUAL WHEEL - LH:

    14-373 (1/69-12/75)

  • KIT, DUAL WHEEL - RH:

    14-372 (1/69-12/75)

  • TIRE & WHEEL ASSEMBLY, 6:70-15, 6 PLY - LH:

    14-368 (1/69-12/75)

  • TIRE & WHEEL ASSEMBLY, 6:40-15, 6 PLY - LH:

    14-367 (1/69-12/75)

  • TIRE & WHEEL ASSEMBLY, 5:00-15, 4 PLY - RH:

    14-366 (1/69-12/75)

  • TIRE & WHEEL ASSEMBLY, 4:00-15, 4 PLY - RH:

    14-365 (1/69-12/75)

  • KIT, WORE TWISTER COVER - WIRE TIE:

    14-387 (1/69-12/75)

  • KIT, BALE COUNTER FOR SERIES 532:

    14-378 (1/69-12/75)

  • KIT, KNOTTER COVER - TWINE TIE:

    14-377 (1/69-12/75)

  • TIRE & WHEEL ASSEMBLY, 9:50-14, 6 PLY - LH:

    14-394 (1/69-12/75)

  • TIRE & WHEEL ASSEMBLY, 6:40-15, 4 PLY - RH:

    14-393 (1/69-12/75)

  • 532 SERIES BASIC BALER W/WIRE TIE:

    14-351 (1/69-12/72)

  • 532 SERIES BASIC BALER W/TWINE TIE:

    14-350 (1/69-12/72)

  • 542 SERIES BASIC BALER W/WIRE TIE:

    14-353 (1/69-12/72)

  • 542 SERIES BASIC BALER W/TWINE TIE:

    14-352 (1/69-12/72)

  • FORD 150 PTO HAY BALER W/TWINE KNOTTER:

    14-270 (1/61-12/70)

  • HAY BALER W/ENGINE & WIRE TWISTER:

    14-171 (1/58-12/70)

  • HAY BALER W/PTO & KNOTTER:

    14-170 (1/58-12/70)

  • HAY BALER W/PTO & WIRE TWISTER:

    14-172 (1/58-12/70)

  • NH SQUARE BALER ABOVE S/N 12778:

    268 (7/64-6/68)

  • NH SUPER SQUARE HAYLINER BALER:

    S67 (10/60-12/67)

  • NH SQUARE BALER BELOW S/N 12777:

    268 (7/63-7/64)

  • PTO HAY BALER W/KNOTTER:

    14-80 (1/55-12/63)

  • FORD 150 PTO HAY BALER:

    14-192 (1/58-12/61)

  • NH HAYLINER BALER:

    67 (7/60-7/61)

  • NH SUPER SQUARE BALER:

    S78 (8/58-7/61); S69 (7/59-7/61); S68 (8/58-10/60)

  • NH HAYLINER TWIN TIE SQUARE BALER:

    68 (5/56-7/58)

HARV EQ (HEADERS)

  • VARIFEED GRAIN HEADER:

    3050 (12/08-12/99)

  • DRAPER HEADER:

    840CD (11/11-3/18); 880CF (11/11-5/16)

  • RICE DRAPER HEADER:

    92C (6/01-12/12)

  • GRAIN DRAPER HEADER:

    94C (4/03-12/12)

  • NH DRAPER GRAIN HEADS:

    994 (4/98-12/04)

  • NH RIGID GRAIN HEAD:

    971 (7/84-12/01); 970 (7/80-7/83)

  • NH FLEXIBLE GRAIN HEAD:

    973 (7/84-12/01); 972 (7/80-7/83)

  • NH 4-ROW WIDE CORN HEAD:

    974W4 (7/80-4/97)

  • NH 8-ROW NARROW CORN HEAD:

    974N8 (7/80-4/97)

  • NH 6-ROW NARROW CORN HEAD:

    974N6 (7/80-4/97)

  • NH 4-ROW NARROW CORN HEAD:

    974N4 (7/80-4/97)

  • NH 6-ROW WIDE CORN HEAD, 36" ROW WIDTH:

    974W6 (7/80-4/97)

  • NH 6-ROW WIDE CORN HEAD, 40" ROW WIDTH:

    974W6-40 (1/77-12/88)

  • NH 8-ROW WIDE CORN HEAD:

    974W8 (7/80-7/88)

  • NH 5-ROW WIDE CORN HEAD:

    974W5 (7/80-7/88)

  • NH GRAIN HEAD & FEEDER HOUSING:

    960 (7/69-7/80)

  • TWO ROW MOUNTED PICKER-SHELLER:

    610-SERIES (1/57-12/74)

  • DRIVE ASSY., COMBINE PTO UNLOADER:

    16-87 (1/56-12/62)

  • 7 FT. HEADER, W/PTO & GRAIN TANK:

    16-99 (1/57-12/62)

  • 7 FT. HEADER, W/ENGINE & GRAIN TANK:

    16-98 (1/57-12/62)

  • POWER DRIVEN PICK-UP ATTACHMENT:

    16-94 (1/57-12/62)

  • PTO DRIVE ASSEMBLY:

    16-85 (1/56-12/59)

  • 7 FT. COMBINE, W/BAGGER, L/DRIVE & HEADER:

    16-83 (1/56-12/59)

  • 7 FT. COMBINE, W/GRAIN TANK, L/DRIVE & HEADER:

    16-82 (1/56-12/59)

  • HART PICK-UP ATTACHMENT:

    16-8 (1/56-12/56)

MATERIAL HANDLING (MANURE SPREADERS)

  • NH BOX MANURE SPREADER:

    125S (4/91-12/03); 135 (7/91-8/94); 791 (7/77-11/90); 213 (7/72-10/90); 329 (7/79-10/90); 328 (7/72-7/78); 518 (7/72-7/77); 512 (7/72-7/76); S676 (7/75-7/76); 676 (7/73-7/75); 675S (7/66-7/72); 212S (7/66-7/71); 510 (7/65-7/71); 516 (7/65-7/71); 331 (7/58-7/66); 210 (7/62-7/65); 325 (7/61-7/65); 470 (7/62-7/64); 475 (7/60-7/63); 336 (7/58-7/61); 330 (1/56-12/58); 335 (7/56-7/58)

  • FORD MANURE SPREADER, P/T 208 BU.:

    20CB200A (3/74-12/81)

  • FORD MANURE SPREADER, TRK/MTD-275:

    20CB350A (3/74-12/81)

  • FORD MANURE SPREADER, P/T 340 BU.:

    20CB340A (3/74-12/81)

  • SLOP & FINE LITTER PAN, 140 BU:

    20CB3311 (3/77-12/81)

  • SECOND BEATER, SPIKE TYPE FOR 208,275,340 BUSHEL SPREADERS:

    20CB3302 (3/74-12/79)

  • HYDRAULIC CYLINDER & HOSES FOR SLOP END GATE 140 BUSHEL SPREADER:

    20CB3113 (3/74-12/79)

  • NH BOX MANURE SPREADER, SINGLE BEATER:

    327S (1/66-12/79)

  • FORD MANURE SPREADER:

    820-SERIES (3/74-12/79)

  • NH BOX MANURE SPREADER, TRIPLE BEATER:

    327T (7/66-12/72); 511 (7/65-7/66); 517 (7/65-7/66)

  • NH BOX MANURE SPREADER, TRUCK MOUNTED:

    677S (7/67-7/70)

  • NH GRINDER MIXER:

    350 (6/62-3/66)

  • NH PTO DRIVEN MANURE SPREADER:

    222 (7/60-7/64); 221 (6/57-12/58); 220 (6/56-12/57)

HARV EQ (ROTARY COMBINES)

  • TWIN ROTOR COMBINE:

    TR99 (1/99-12/02); TR89 (1/99-12/02); TR88 (7/96-12/98); TR98 (7/96-12/98); TR87 (3/94-3/96); TR97 (3/94-3/96); TR86 (7/84-3/94); TR96 (7/84-3/94); TR75 (7/79-7/85); TR85 (7/79-7/84); TR95 (7/79-7/84); TR70 (7/75-7/79)

FORAGE EQ (HEADERS)

  • SICKLE BAR:

    919S (7/79-12/00)

  • NH 12 FT SICKLE BAR UNIT:

    1890S (7/74-7/80)

  • NH 3 ROW WIDE SNAPPER:

    1.89E+06 (7/75-7/80)

  • NH 3 ROW NARROW SNAPPER:

    1890EN3 (7/75-7/76)

  • MOUNTED CORN PICKERS:

    601-SERIES (12/69-12/74)

  • MOUNTED CORN HARVESTERS:

    602-SERIES (12/69-12/74)

  • CORN PICKER ATTACHING KIT SECTION E:

    601-SERIES (12/69-12/74); 602-SERIES (12/69-12/74)

  • JACK STAND ATTACHING KIT FOR DIRECT CUT & PICK-UP ATTACHMENTS:

    4-543678 (1/70-12/72)

  • PICK-UP ATTACHMENT 6-1/2 FOOT PICK-UP:

    4-543669 (1/70-12/72)

  • JACK STAND ATTACHING KIT FOR ALL ROW CROP ATTACHMENTS:

    4-543336 (1/70-12/72)

  • 6-1/2 FOOT DIRECT CUT ATTACHMENT:

    4-566959 (1/70-12/72)

  • FORD 3 - ROW CROP UNIT:

    4-566958 (1/70-12/72)

  • FORD 2 - ROW CROP UNIT:

    4-566957 (1/70-12/72); 4-566956 (1/70-12/72)

  • FORD 1 - ROW CROP UNIT:

    4-566955 (1/70-12/72)

  • CORN PICKER SNAP UNIT - SECTION A:

    602-SERIES (1/40-12/71); 601-SERIES (1/40-12/71)

  • CORN PICKER, SHELLER SECTION D:

    601-SERIES (1/61-12/71); 602-SERIES (1/61-12/71)

  • CORN PICKER HUSK BEDS - SECTION C:

    601-SERIES (1/61-7/71); 602-SERIES (1/61-7/71)

  • 1-ROW CORN PICKER CROSS CONVEYOR - SECTION B:

    601-SERIES (1/61-7/71)

  • 2-ROW CORN PICKER CROSS CONVEYOR - SECTION B:

    602-SERIES (1/61-7/71)

  • FORD HAY PICK-UP ATTACHMENT:

    14-46 (1/59-12/61)

FORAGE EQ (WAGONS, BOXES & BLOWERS)

  • NH FORAGE BLOWER - 1000 RPM:

    40 (7/85-6/00)

  • NH FARM WAGON:

    612 (7/87-6/96); 614 (7/89-6/96); 608 (7/87-6/96); 610 (7/87-6/96)

  • NH FORAGE BOX:

    818B (7/90-6/96); 816 (7/90-6/96); 716 (7/87-3/96); 7 (7/63-7/67)

  • NH FORAGE BLOWER:

    28 (7/76-3/96); 30 (7/77-7/86); 25 (7/71-7/82); 27 (7/70-7/76); 26 (7/66-7/70); 23 (7/61-7/65); 24 (7/60-7/65)

  • NH CROP CARRIER:

    8 (7/68-7/87); 6 (7/61-7/70); 3 (7/59-7/62)

  • FORD FORAGE BOX:

    20CB810 (1/70-12/81); 20CB810B (1/70-12/81); 810-SERIES (1/68-12/81)

  • 18" EXTENSION PANELS:

    20CB812 (1/70-12/81)

  • TANDEN AXLE ADAPTER KIT, REAR:

    20CB822 (1/68-12/81)

  • FORAGE ROOF:

    20CB813 (1/71-12/81)

  • WAGON DRAWBAR EXTENSION, FOUR POSTION, SHORT TONGUE:

    4-542050 (1/70-12/72)

  • FORD BIG BLUE FORAGE WAGON:

    86601 (1/68-12/71); 86602 (1/68-12/71); 86604 (1/68-12/71)

  • FORD 605 SERIES BROADCAST ATTACHMENT:

    14-268 (1/61-12/70)

  • NH SUPER FORAGE BLOWER:

    S24 (7/60-7/65); S23 (7/61-7/65)

  • TRIPOD UNLOADER:

    670 (1/55-12/63)

  • NH FORAGE BLOWER - HOPPER:

    22 (7/56-7/61)

MATERIAL HANDLING (GRINDER MIXERS)

  • NH GRINDER MIXER:

    358 (7/79-8/95); 355 (4/77-7/95); 359 (7/78-12/92); 353 (7/70-12/92); 357 (3/72-1/79); 354 (3/71-12/76); 352 (1/75-12/75); 351 (6/66-11/67); 340 (3/64-9/65)

  • NH SMALL TUB GRINDER:

    391 (7/84-7/85); 390 (7/80-7/83)

  • NH LARGE TUB GRINDER:

    396 (7/70-7/81)

  • NH MEDIUM TUB GRINDER:

    393 (7/77-7/78)

  • NH TUB GRINDER:

    379 (7/75-7/76)

FORAGE EQ (SP FORAGE HARV)

  • NH SP FORAGE HARVESTER:

    1915 (6/89-6/95); 2115 (7/88-6/95); 1900 (7/80-7/88); 1895 (7/77-7/82); 1890 (7/75-7/78); 1880 (7/67-7/75)

  • NH SP FORAGE HARVESTER AFTER S/N 404591:

    2100 (7/80-7/88)

  • NH SP FORAGE HARVESTER S/N 404501-404590:

    2100 (11/79-1/80)

  • Spoiler

    1880 (7/67-7/75)

  • NH SELF PROPELLED HARVESTER, AFTER S/N 1500:

    SP818 (1/61-12/67)

TRACTORS (AG)

  • 6 CYL AG TRACTOR:

    8730 (3/90-12/93); 8630 (3/90-12/93); 8530 (3/90-12/93); 8830 (3/90-12/93); TW15 (1/83-2/90); TW5 (1/83-2/90); TW35 (1/83-2/90); TW25 (1/83-2/90)

  • 6 CYL AG TRACTOR FLAT DECK:

    TW10 (1/79-12/82); TW20 (1/79-12/82); TW30 (1/79-11/82); 8700 (8/76-12/78); 9700 (8/76-12/78)

  • 6 CYL TRACTOR:

    8000 – SERIES (1/68-12/78); 9000 – SERIES (1/69-12/78)

  • 6 CYL AG TRACTOR ROW CROP:

    8600 (10/72-7/76); 9600 (10/73-7/76); 8200 (1/68-9/72); 9200 (1/69-9/72)

  • 6 CYL AG TRACTOR INDUSTRIAL:

    8400 (1/71-9/72)

TRACTORS (ATTACHMENTS)

  • BACKHOE:

    B134 (7/86-1/93)

HARV EQ (CONV COMBINES)

  • VERSATILE COMBINE - 1986:

    2000V (1/86-12/86)

  • VERSATILE COMBINE:

    2000VII (1/85-12/85); 2000VI (1/84-12/84)

  • VERSATILE COMBINE - 1981:

    2000V (1/81-12/81)

  • NH COMBINE, FEEDER HOUSING:

    1500 (7/73-12/79); 1400 (7/74-12/78)

  • NH COMBINE, STRAW CHOPPERS:

    1500 (7/73-12/79); 1400 (7/74-12/78); 985 (7/66-12/73); 995 (7/67-12/73); 990 (7/65-12/68)

  • Spoiler

    1500 (7/73-12/79); 1400 (7/74-12/78); 975 (1/66-12/75); 985 (7/66-12/73); 995 (7/67-12/73); 990 (7/65-12/68); 980 (7/65-7/67)

  • NH COMBINE - BASE UNIT:

    1500 (7/73-7/79); 1400 (7/74-7/78)

  • COMBINE, S/N 3507004-3507999,2509001-3510999,3511001-3511999:

    975 (7/66-7/75)

  • COMBINE, S/N 55001-55999:

    975 (7/66-7/75)

  • COMBINE, S/N 660001-660999 & 821001-821999:

    975 (3/71-7/75)

  • COMBINE, S/N 409001-409999 & 509001-509999:

    975 (1/69-7/75)

  • COMBINE, S/N 3307001-3307999 & 3308001-3309999:

    995 (2/73-7/73)

  • COMBINE, S/N 65001-811999:

    985 (7/66-7/73)

  • COMBINE, S/N 449001-44999 & 519001-519999:

    985 (7/66-7/73)

  • COMBINE, S/N 3408001-3409999:

    985 (7/66-7/73)

  • COMBINE, S/N 288001-288999:

    985 (7/66-7/73)

  • COMBINE, S/N 328001-328999:

    995 (7/67-7/73)

  • COMBINE, S/N 640001-640999, 720001-720999, 801001-801999:

    995 (4/71-7/73)

  • COMBINE, S/N 459001-459999 & 529001-529999:

    995 (7/67-7/73)

  • FORD BASIC SP COMBINE, L/HYDRAULICS:

    17-1 (1/59-12/71)

  • FORD HEADER ASSY 12 FT. SP COMBINE:

    17-3 (1/60-12/64)

  • SP COMBINE STRAW CHOPPER KIT:

    17-23 (1/61-12/64)

  • FORD HEADER ASSY 10 FT. SP COMBINE:

    17-2 (1/59-12/64)

  • FORD SELF PROPELLED COMBINE:

    611-SERIES (1/64-12/64)

  • 6 FT. PULL TYPE COMBINE, W/PTO DRIVE & GRAIN TANK, 16-47:

    607-1-SERIES (1/55-12/62)

  • 7 FT. PULL TYPE COMBINE, W/PTO DRIVE & GRAIN TANK, 16-99:

    607-3-SERIES (1/55-12/62)

  • 6 FT. PULL TYPE COMBINE, W/PTO DRIVE & BAGGER, 16-49:

    607-2-SERIES (1/55-12/62)

  • 7 FT. PULL TYPE COMBINE, W/PTO DRIVE & BAGGER, 16-101:

    607-4-SERIES (1/55-12/62)

  • FORD PULL TYPE COMBINE:

    607-SERIES (1/54-12/62)

  • 7 FT. PULL TYPE COMBINE, W/PTO & GRAIN TANK:

    607-9-SERIES (1/54-12/62)

  • 7 FT. PULL TYPE COMBINE, W/ENGINE DRIVE & BAGGER, 16-100:

    607-8-SERIES (1/55-12/62)

  • 7 FT. PULL TYPE COMBINE, W/ENGINE DRIVE & GRAIN TANK, 16-98:

    607-7-SERIES (1/55-12/62)

  • 6 FT. PULL TYPE COMBINE, W/ENGINE DRIVE & BAGGER,16-48:

    607-6-SERIES (1/55-12/62)

  • 6 FT. PULL TYPE COMBINE, W/ENGINE DRIVE & GRAIN TANK, 16-46:

    607-5-SERIES (1/55-12/62)

  • 6 FT. COMBINE, W/PTO DRIVE & BAGGER:

    16-49 (1/54-12/59)

  • 6 FT. COMBINE, W/ENGINE DRIVE & BAGGER:

    16-48 (1/54-12/58)

  • 6 FT. COMBINE, W/PTO DRIVE & GRAIN TANK:

    16-47 (1/54-12/58)

  • 6 FT. COMBINE, W/ENGINE DRIVE & GRAIN TANK:

    16-46 (1/54-12/58)

  • FORD 611-SERIES WINDROW PICK-UP ATTACHMENT:

    17-27 (1/52-12/57)

HARV EQ (SWATHERS)

  • NH SP GRAIN WINDROWER:

    1090 (7/79-7/84)

  • VERSATILE AUGER HEADER SWATHER:

    1400V (1/81-12/81)

MATERIAL HANDLING (SPECIALTY)

  • NH BALE HANDLER:

    85 (5/75-6/84)

  • TOBACCO LEAF STRIPPER:

    595 (9/80-9/82)

  • CYCLE-TIMED FEEDER:

    571 (1/75-5/77)

  • SILO UNLOADER:

    590 (1/68-12/68)

  • CROP DRYING BIN:

    736 (1/65-12/65); 735 (10/59-10/64)

  • GRAIN DRYING BIN:

    766 (1/62-12/65); 765 (10/59-10/64); 733 (6/58-12/63); 763 (6/58-10/59)

HARV EQ (LEGACY)

  • DEARBORN-WOOD BROS. COMBINE W/GRAIN TANK:

    16-1 (1/48-12/79)

  • DEARBORN-WOOD BROS. COMBINE W/BAGGER:

    16-2 (1/48-12/79)

  • FORD TWO ROW CORN PICKER-SHELLER:

    16-111 (1/57-12/74)

  • KIT, 2-ROW CORN PICKER & HARVESTER TO AC:

    16-110 (1/69-12/74)

  • KIT, ONE ROW TANK SHELLER TO 600, 800, 540 RPM/70:

    16-148 (1/61-12/74)

  • TWO ROW DRIVE KIT:

    16-142 (1/61-12/74); 16-141 (1/61-12/74)

  • KIT, 1-ROW SNAP UNIT TO JOHN DEERE A, B, 50, 60 & 70:

    16-133 (1/69-12/74)

  • KIT, 1-ROW SNAP UNIT TO NAA, 600, 800, DEXTA, 540 RPM:

    16-129 (1/69-12/74)

  • KIT, TWO ROW PICKER & HARVESTER, DRIVE TO JOHN DEERE 3010, 1000:

    16-166 (1/61-12/74)

  • TWO ROW PICKER & HARVESTER KIT:

    16-165 (1/69-12/74)

  • PICK-UP POWER DRIVEN:

    16-73 (1/56-12/74)

  • CORN PICKER & HARVESTER MOUNTING KIT FOR 16-65, 16-67:

    16-69 (1/54-12/74)

  • CORN PICKER & HARVESTER MOUNTING KIT, FOR 16-65, 16-67:

    16-68 (1/54-12/74)

  • ONE ROLL CROSS CONVEYOR:

    16-121 (1/55-12/72)

  • CORN PICKER SNAPPING UNIT:

    16-120 (1/61-12/71)

  • 2-ROW MOUNTED SNAPPING UNIT - FOR 901 & 4000 RC TRACTORS:

    16-120 (1/61-12/71)

  • FORD CORN PICKER SNAPPING UNIT:

    16-119 (1/61-12/71)

  • 1-ROW MOUNTED SNAPPING UNIT:

    16-119 (1/55-12/71)

  • TWO ROLL CROSS CONVEYER:

    16-122 (1/61-12/71)

  • FORD CORN SNAP UNIT 2 ROW MTD:

    16-174 (1/61-12/71)

  • 2-ROW MOUNTED SNAPPING UNIT - 4200, 5200 & 6000 RC TRACTORS:

    16-174 (1/61-12/71)

  • 1-ROW MOUNTED HARVESTER CROSS CONVEYOR:

    16-121 (1/55-7/71)

  • 2-ROW MOUNTED HUSK BED, 12 ROLL:

    16-125 (1/61-7/71)

  • 2-ROW MOUNTED HUSK BED, 8 ROLL:

    16-124 (1/63-7/71)

  • 1-ROW MOUNTED HUSK BED, 4 ROLL:

    16-123 (1/61-7/71)

  • 2-ROW MOUNTED HARVESTER CROSS CONVEYOR:

    16-122 (1/61-7/71)

  • 2-ROW MOUNTED HUSK BED, 8 ROLL W/MULTILUBE:

    16-157 (9/67-7/71)

  • CORN PICKER 1-ROW MTD TANK:

    16-126 (1/69-12/70)

  • SHELLER ASSY., 2 ROW:

    16-118 (1/39-12/63)

  • KIT, ENGINE STRAW CHOPPER:

    16-109 (1/58-12/62)

  • KIT, PTO STRAW CHOPPER:

    16-108 (1/58-12/62)

  • 7 FT. COMBINE, W/PTO & BAGGER:

    16-101 (1/58-12/62)

  • 7 FT. COMBINE, W/ENGINE & BAGGER:

    16-100 (1/57-12/62)

  • FLAX ROLL ATTACHMENT, W/O PICK-UP:

    16-55A (1/55-12/62)

  • FLAX ROLL ATTACHMENT:

    16-72 (1/55-12/62)

  • PICK-UP, HART, POWER DRIVEN:

    16-70 (1/55-12/62)

  • COMBINE, 7 FT. PULL TYPE W/PTO & GRAIN TANK:

    17-15 (1/58-12/61)

  • FORD 611-SERIES WINDROW PICK-UP ATTACHMENT:

    17-9 (1/59-12/60)

  • FLAX ROLL ATTACHMENT FOR COMBINE W/PICK-UP:

    16-55 (1/55-12/56)

  • HART PICK-UP ATTACHMENT:

    16-36 (10/50-12/56)

  • 6 FT. COMBINE, W/PTO & GRAIN TANK, L/CUTTING PARTS & REEL:

    16-74 (1/56-12/56)

  • 6 FT. COMBINE, W/ENGINE & GRAIN TANK, L/CUTTING PARTS & REEL:

    16-75 (1/56-12/56)

  • PICK-UP ATTACHMENT, GROUND DRIVEN:

    16-60 (1/54-12/55)

  • HYDRAULIC CYLINDER ATTACHMENT FOR 16-4:

    16-51 (1/54-12/54)

  • STRAW SPREADER ATTACHMENT:

    16-57 (1/54-1/54)

  • LOW CYLINDER SPEED ATTACHMENT:

    16-52 (1/54-1/54)

ENGINES (WISCONSIN)

  • WISCONSIN 4 CYL GAS ENGINE:

    VG4D (7/68-7/75)

  • WISCONSIN 4 CYL ENGINE:

    VP4D (7/68-7/75)

  • WISCONSIN 4 CYL AIR-COOLED ENGINE:

    VR4D (9/58-7/59)

LIGHT EQ (TRENCHERS)

  • TRENCHER:

    T220 (7/73-7/74); T550 (7/73-7/74); T330 (7/73-7/74)

FORAGE EQ (ATTACHMENTS)

  • FORD 605 SERIES FORAGE HARVESTER:

    14-190 (1/58-12/72); 14-191 (1/58-12/59)

  • FORD 605 SERIES HAND LIFT ASSEMBLY:

    14-196 (1/55-12/70); 14-143 (1/57-12/61)

  • FORD 605 SERIES TRACTOR HYD CABLE LIFT:

    14-142 (1/55-12/70)

  • FORD 605 SERIES HARVESTER PTO DRIVE ASSY, COMPLETE:

    14-138 (1/55-12/57)

  • FORD 605 SERIES ROW CROP ATTACHMENT:

    14-162 (1/57-12/57)

CASE CE

LIGHT EQ (TRENCHERS)
  • CASE TURBO HORIZONTAL DIRECTIONAL DRILLING MACHINE:

    6010 (7/99-12/04)

HEAVY EQ (WHEELED EXC)

  • CASE WHEELED EXCAVATOR - RAIL-ROAD (GERMANY):

    688B (8/98-12/02)

NH CE

LIGHT EQ (SKID STEER)
  • HEAVY DUTY BACKHOE:

    BH134 (1/90-12/94)

  • NH SKID STEER LOADER:

    L35 (7/71-7/80)

LIGHT EQ (LOADER BACKHOES)

  • LOADER BACKHOE, USED ON & BSN 735311:

    LB620 (7/84-12/89)

  • LOADER BACKHOE, USED ON & ASN 735312:

    LB620 (7/87-7/89)

ENGINES (FORD)

  • FORD 6 CYL GAS ENGINE:

    250 (1/75-12/80)


View Parts Catalog

Additional information

Manufacturer

New Holland

Reviews

There are no reviews yet.

Be the first to review “New Holland Woodruff Key Part # 80768”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Related products