New Holland’s MowMax™ true-modular disc cutterbars are the industry’s best. The legendary performance and proven reputation of the true-modular design backed by the 3-Year MowMax protection plan has been an integral part New Holland’s success in hay equipment.
To further that success, New Holland is now transitioning the extended internal cutterbar driveline protection into a 3-year New Holland factory limited warranty for the following model families:
H6000 Series mounted and trailed disc mowers
Discbine® side-pull and center-pivot disc mower-conditioners
Durabine® disc heads for Speedrower® self-propelled windrowers
Stop in at any of our locations for more information today!
The NutriMax liquid fertilizer applicator helps ensure optimum crop performance through precise placement of nutrients when it’s most needed during periods of high growth. The unique fold design provides a narrow transport width of less than 15′ allowing you to easily travel from field-to-field. The 1800 and 2600 gallon tank capacities and industry leading components allow you to quickly cover your acres. A rugged frame and toolbar design is built for high-speed application and 36″ of total toolbar clearance provides a longer application window. Travel the extra mile, cover the extra acre with the NutriMax!
We are proud to be a Loftness dealer at our Rochester and Logansport locations, as they offer an innovative product line to help get routine tasks done quicker and more efficiently.
For instance, we currently have a new 2016 Loftness 720S rock picker that has a universal skid steer mount to work on most skid steers, and are offering it for over $500 of their suggested list price (view here)! Check it out in action here:
Visit www.loftness.com to view their full product line, or stop in or give us a call at either our New Holland Rochester (574-223-2714) or New Holland Logansport (574-753-6291) location for more information!
How do you use your mower? At home or on the job? Do you need your mower to mulch, edge, collect debris or clear snow? Grasshopper does ALL this, and so much more.
Grasshopper mowers are made in the USA, and works hard to make a mower that’s comfortable to use, and engineered to outperform your expectations year-round.
Visit our Rochester, Logansport, or Centerville locations today and get your hands on a Grasshopper. We have the parts and service staff on hand to make sure your mower stays serviced properly for years. Visit grasshoppermower.com for more information.
We’d like to invite you all to come to the annual FFA Auction held every year at the Fulton County Fairgrounds this Saturday, March 26th. There will be a large selection of items on hand to bid on (mowers, hay tools, skid steers, tractors, attachments, etc.). Below is a list of items that we will be taking, but there will be even more items than what’s listed here for sale!
When: Saturday, March 26th, 2016 – Bidding starts at 9am
Where: Fulton County Fairgrounds, 1009 W 3rd St, Rochester, IN 46975
Other Notes: A pancake breakfast will be served at the Community Building from 6-10am by the local Optimist Club and Girl’s Softball Team in order to raise funds for the ball diamonds.
Introducing the New Holland Certified Pre-Owned program, applicable to select New Holland tractors and combines. This program includes a comprehensive New Holland Protection Plan with Extended Powertrain Coverage** designed to help keep your equipment working properly beyond the manufacturers base warranty period. The New Holland Protection Plan covers all major engine and drivetrain components with a $0 deductible.* But best of all, the Certified Pre-Owned Program is a great opportunity to own New Holland with confidence and work it with pride.
Not just any Equipment can be called New Holland Certified Pre-Owned
It takes a special kind of tractor and combine- serviced by a special caliber of technician- to be eligible for New Holland certification. The Certified Pre-Owned program only applies to late model CR and CX Series combines and T8 and T9 series tractors, or CR/CX/T8/T9 models that are no more than five years old. Strict engine-hour requirements (maximum 1,500 hours for combines, 2,000 hours for tractors) are also enforced. Only then does each New Holland tractor and combine undergo a fluid analysis by factory-trained certified dealer’s service technicians plus a comprehensive inspection- 200+ point for combines and 100+ point for tractors. Equipment is meticulously examined and serviced- top to bottom- and any part that doesn’t meet New Holland’s rigorous standards is replaced with a genuine factory-authorized part. New Holland’s exhaustive certification process is your guarantee that you’ll work confidently with field-tested New Holland quality and durability for years.
Certified Pre-Owned Inspection
CR & CX Series Combines: 200+ point inspection
T8 & T9 Series Tractors: 100+ point inspection
New Holland tractors and combines that qualify for the Certified Pre-Owned program undergo a thorough, systematic inspection and reconditioning process. If a part is worn or defective, it’s replaced. Nothing is left to chance. Every piece of Certified Pre-Owned equipment undergoes an initial pre-certification check to ensure that it is in good operational condition and no problems exist. A fluid analysis of engine oil, coolant hydraulic fluid and diesel fuel is performed to determine the overall health of tractor or combine prior to inspection. This state-of-the-art fluid analysis identifies dirt, wear particles, fuel dilution and coolant contaminants that can cause catastrophic failure or significantly shorten equipment life. These risks are eliminated even before we start the rigorous inspection process. Following inspection results, any parts requirements are fulfilled using genuine New Holland parts or remanufactured parts. Certified New Holland technicians perform all necessary repairs to return the equipment to field- ready condition.A final verification- conducted only after successfully meeting all of the above analysis and inspection checkpoints- ensures that all repairs meet 100% New Holland standards and the equipment is ready for the Certified Pre-Owned designation.
New Holland Protection Plan Extended Powertrain Coverage*
New Holland Certified Pre-Owned equipment is backed by our New Holland Powertrain Protection Plan to cover your equipment beyond the New Holland base warranty period. The New Holland Powertrain Plan includes 12 month/2500 total engine Hours, whichever occurs first for T8 and T9 series tractors and 12 months/2000 total engine hours, whichever occurs first for CR and CX series combines and covers the following components: Engine Final Drives Transmission Rotor Drive Engine- Mounted PTO Header- Drive Components Gear Boxes (Combines) Hydrostatic Pump and Motor (Combines) Driveline (Tractors) There is a $0 deductible under the Certified Pre-Owned program. This provides you with peace of mind, dependable service and can even be transferred to a new owner at no charge.
*See the New Holland Protection Plan Contract for all terms and conditions, limitations and exclusions.
For more than 120 years New Holland has built a brand around a passion for farming and an enduring focus on innovation, which has allowed New Holland to shape agriculture’s history books.
New Holland’s industry landmarks, such as inventing the world’s self-knotting baler and first twin rotor combine, have helped establish the brand’s past while shaping their future. They strive to launch new products and technology in order to help you, our customers, operate more efficiently and to meet the ever-growing demands placed on the industry and the people who make a living by it.
This line of thinking has inspired New Holland’s newest campaign – Equipped for a New World.
We look forward to helping continue New Holland’s heritage and passion for continuing to innovate in order to help improve the lives of farmers all around the globe.
We have two NEW 25′ Kuhn Krause 8000 Excelerators available at a discounted price of $49,500 through the end of March! Both units are 2014 models that have been demoed, but they are still treated as new for warranty purposes. One unit is located at New Holland Greentown, and the other is at New Holland Centerville.
NEW New Holland Roll-Belt 450 and 460 round balers deliver industry-leading density now with 20% MORE CAPACITY!
Their proven Roll-Belt design uses heavy-duty steel rolls and short, puncture-resistant belts to create the densest, most weather-resistant bales in the industry. This allows for easier handling and decreased storage losses so you preserve more valuable hay every season.
We can tell you about the new choice in pickups that result in the 20% capacity increase-the ActiveSweep, SuperFeed and CropCutter pickups. Also, the EdgeWrap system features a new, lower loading height and a shorter net travel path for dependable wrapping every bale.
