CNH Industrial 14 oz Tube Multi-Purpose Grease EP AW NLGI 2 MAT 3555-A Part # 73344349

Description

Specifications:

• Operating Temp.: -20°C to 121°C (-5°F to 250°F)
• Thickener: Lithium
• NLGI 2
• MAT 3555-A
• Size: 14 oz tube

What is Grease?

Grease is a thickened lubricant that is comprised of three main parts: base oil that does the lubricating, thickener that immobilizes the base oil, and additives which enhance the performance of the grease. In order for a grease to be effective it should:

• Stay in contact with the moving surfaces
• Not leak out under gravity or centrifugal action
• Resist being squeezed out under pressure
• Be shear stable at all temperatures that it’s subjected to during use
• Be able to flow from spot to spot in the lubricated machine, as needed
• Not add significantly to the power required to operate the machine, particularly at start-up

Why Use Grease Instead of Oil?

• Stays where you put it
• Minimal dripping, leaking and splattering
• Seals out contaminants
• Decreases frequency of lubrication
• Noise reduction/dampening

Additives and Thickener Types

CNH Industrial greases are formulated with numerous additives to enhance and maintain consistent performance.

• Antioxidants
• Anti-wear
• Extreme pressure additives
• Friction modifiers
• Dyes
• Anti-weld and solid lubricants
• Rust and corrosion inhibitors
• Tackifiers and polymers
• Viscosity index improvers

Lithium/Lithium Complex Thickener:

• Generally good to excellent performance characteristics
• Proven technology and performance
• Relatively inexpensive

Calcium Sulfonate Complex Thickener:

• Inherent EP/anti-wear
• Very high dropping point
• Excellent rust prevention
• Excellent water washout resistance

MAT Matters

There are currently no API specifications for greases; therefore, the MAT code on your grease label is what differentiates it from the competition. It certifies that our greases are tested and approved by CNH Industrial engineers to meet the demands of CASE, Case IH, and New Holland machines. Common grease laboratory tests:

• Unworked/Worked Penetration (ASTM D -217)
• Dropping Point (ASTM D-2265)
• Oil Separation (ASTM D-6184, D-1742)
• Oxidation Stability (ASTM D-942)
• Water Washout (ASTM D -126 4)
• Fretting Wear (ASTM D 4170)
• Water Sprayoff (ASTM D-4049)
• Bearing Rust Test (ASTM D-1743)
• Copper Corrosion (ASTM D-4048)
• Four Ball Wear (ASTM D-2266)
• Four Ball Weld Load (ASTM D-2596)
• Low-Temperature Torque (ASTM D-4693)

Grease Consistency

The National Lubricating Grease Institute (NLGI) consistency number (sometimes called “NLGI grade”) expresses a measure of the relative hardness of a grease used for lubrication, as specified by the standard classification of lubricating grease established by the NLGI.

 

Rudnick, Leslie R. (2005). Synthetics, Mineral Oils, and Bio-Based Lubricants: Chemistry and Technology (Chemical Industries). CRC. p. 468. ISBN 1-57444-723-8

 

 

Product Offering