Description
LOCTITE 638 Retaining Compound (1835937) is a maximum-strength retaining compound for use where high-dynamic force or cyclic loading is expected. Locks cylindrical assemblies up to 0.010″ diametral clearance. Fixtures in 4 minutes. No primer needed; oil tolerant.
Typical Applications: Axle bearings, water and power steering pump pulleys.
Dimensions
Gap Fill Size – Retaining Compounds | 0.01 in |
Container Size | 0.34 fl oz |
Container Size – Adhesives | 0.34 oz |
Maximum Gap Fill Size | 0.01 in |
Size | 10ml |
Gap Fill Size | 0.01 in |
Filling Gap Size | 0.010″ |
Details
Item | Retaining Compound |
Shear Strength (PSI) | 4,500 psi |
Optimal Usage Temperature | -65 Degrees to 355 Degrees F |
Color | Green |
Compatible Materials | Steel |
Container Type – Adhesives | Bottle |
Application | Slip Fitted Parts |
Operating Temperature Range | -65 Degrees F to 355 Degrees F |
Shear Strength | 4,200 psi |
Full Cure | 24 hr |
Standards | 29 CFR 1910.1200 |
Physical Form | Liquid |
Type | Urethane Methacrylate |
Series | 638 |
Characteristics | Oil Tolerant |
Compound Type | High Strength |
Max. Temp. (F) | 355 Degrees F |
Minimum Viscosity | 2,000 cps |
For Material Type | Steel |
VOC Content Weight Percentage | 3% |
Working Time Range | 5 min and Under |
Specific Gravity | 1.1 |
Color Family | Green |
Minimum Operating Temperature | -65 Degrees F |
Product Form | Liquid |
Retaining Compound Properties | For Loose-Fitting Parts, High Strength |
Container Type | Bottle |
Working Time | 4 min |
Clean Up Method | Solvent, Wire Brush |
Chemical Base | Urethane Methacrylate |
Full Cure Time | 1 day |
Cure Type | Anaerobic |
Primer Required | Yes |
Storage Requirements | 8 Degrees to 21 Degrees C |
Non-Toxic | No |
Maximum Viscosity | 3,000 cps |
Flash Point | 200 Degrees F |
Brand & Series | LOCTITE 638 |
Maximum Operating Temperature | 355 Degrees F |
Retaining Compounds Properties | For Loose Fitting Parts, High Strength |
Retaining Compound Strength | High |
Reviews
There are no reviews yet.