New Holland AE50 Award winners for 2016 include:
- IntelliCruiseTM Feed Rate Control System for New Holland BigBaler Series Large Square Balers
- T7.315 and T7.290 Heavy Duty Tractors
- Flexi-Coil® P Series Air Carts
- Modular and Configurable Rice Concave for New Holland CX Combines
- AutofloatTM Sunflower Kit for Mid-range CX Combines
- Dual StreamTM Header Attachment for all New Holland Combines
New Holland Agriculture has been honored with six prestigious AE50 Awards for engineering and innovation excellence by the American Society of Agricultural and Biological Engineers (ASABE). The AE50 Award Program is sponsored annually by ASABE, and celebrates product innovations in the areas of agricultural, food, and biological system engineering. The Award is given to products that rank highest in innovation, significant engineering advancement, and impact on the market served.
“I am exceptionally proud of these awards and I consider them a fitting testament for New Holland in 2016.” Stated Carlo Lambro, Brand President, New Holland Agriculture. “They represent the key strengths of our brand, our people, who have shown unswerving dedication and our commitment to developing state of the art technology, which improves the efficiency, productivity and sustainability of the world’s farmers.”
IntelliCruise™ Feed Rate Control System
The IntelliCruise Feed Rate Control System for New Holland BigBaler Series Large Square Balers allows the baler to run at optimal performance by controlling the speed of the tractor. Since most fields have varying crop yields, resulting in inconsistent swaths, it becomes difficult to maintain a consistent feed rate. The IntelliCruise System helps to overcome this challenge for operators, allowing them to achieve targeted operating capacity or specified flake number and uniform thickness while baling.
The new IntelliCruise™ Feed Rate Control System offers the operator two modes of operation: Charge Control (Rotor Cutter Only) or Slice Control (all BigBaler models).
When operated in Charge Control Mode, IntelliCruise automatically matches the tractor’s forward speed to crop load at the BigBaler. A charge sensor on the stuffer constantly monitors the bale charges, or slices, delivered to the bale chamber. The system measures the demand placed on the baler (from cropflow) and adjusts the tractor’s forward speed for optimal crop feeding. In areas with lighter crop, forward speed automatically increases so you consistently work at the capacity you specify.
In Slice Control Mode, tractor speed is adapted based on slice thickness by utilizing the electronic bale length potentiometer. This ensures that each bale has the exact number of slices that have been defined by the operator.
Using the IntelliCruise system results in reduced fatigue because fewer operator interventions are needed, up to 9% higher capacity and productivity over an inexperienced or fatigued operator, and lower fuel consumption resulting in lower production costs.
T7.315 and T7.290 Heavy Duty Tractors
New Holland expands its tractor offering with brand new models, the T7.290 and T7.315, to meet the demand for growers needing increased power, but the versatility to perform numerous jobs. These new T7 series tractors deliver power without compromise, class-leading torque and high efficiency.
These models offer growers unparalleled versatility for performing a wide range of jobs. They are ideal for row crop work, baling hay, mowing, hauling manure or other big chores. The Horizon™ cab provides a quiet and supremely comfortable operating environment, along with precision technology that enables growers to optimize efficiency and performance, while staying connected with their entire farming operation. These new models also feature New Holland’s revolutionary IntelliCruise™ tractor-baler automation that allows the New Holland BigBaler to control the tractor’s speed according to changes in the windrow to maximize productivity and bale consistency.
Flexi-Coil® P Series Air Carts
The all-new Flexi-Coil® P Series Air Carts from New Holland set a new standard for accurate, reliable air-seeding delivery. Each primary run on the IntelliRate™ Modular Metering System (IMMS) operates using patented, independent, 24-volt electric-drive motors with integrated controls that provide the flexibility to accurately apply product in either single-shoot or double-shoot applications. This modular system can distribute and combine any tank to any primary run. The IMMS system adjusts rates on individual runs to match the number of ports for each separate header maintaining seeding accuracy across the entire width of the drill.
The P Series IntelliRate™ sectional-control option has the ability to individually control up to 12 sections of the air drill to eliminate double applications of seed and fertilizer. With New Holland PLM™ (Precision Land Management) auto-guidance, the system turns off air-drill sections automatically in areas that have already been covered.
Modular and Configurable Rice Concave for New Holland CX Combines
The new Modular and Configurable Rice Concave for New Holland CX Combines gives customers the ability to quickly and easily switch between crops as well as configure the concave for the optimal balance of protecting grain quality while reducing the amount of crop left unthreshed.
Instead of spending hours exchanging a compete concave, the operator can easily unbolt and remove sections of the concave to remove or add friction wires to match crop conditions in less than 30 minutes. Broken kernels in this sensitive crop can be reduced by 50 percent while unthreshed grain heads can be reduced to nearly zero. This new rice concave is an option on New Holland CX7 & CX8 combine models.
AutofloatTM Sunflower Kit for Mid-range CX Combines
The New Holland Autofloat™ Sunflower Kit provides sunflower harvesters the next step in automation by removing the need for the operator to adjust the chopping height while going through the field. The new patented kit, which can be added to most sunflower headers in the market, delivers a constant chopping height – independent of the cutting height — regardless of field conditions or machine orientation.
This is achieved by using hydraulically lifted choppers controlled in a closed loop by sensing and reacting to the ground pressure applied by the chopper. Once the operator sets the cutting height and selects a set point for the pressure of the chopper on the ground, the Autofloat kit keeps the cutting height and ground pressure constant without further intervention of the operator. The system reacts quickly to bumps or stones to avoid damage to the chopper while allowing the operator to focus on other combine functions vs. manual interventions.
Dual Stream™ Header Attachment for all New Holland Combines
The all-new New Holland Dual Stream™ System mounts to the back of the New Holland Varifeed™ Grain Header to allow operators to make a higher cut, removing only the top portion of the crop that contains the grain for processing in the combine. The secondary cutterbar on the Dual Stream™ attachment makes a final, lower cut removing the remaining straw to the final desired stubble height all in the same pass.
The attachment includes a processing roll to actively work the second-cut straw down into the stubble, improving its rate of decomposition. Because the combine is only processing the top, driest portion of the crop, the combine operator will see significant improvements in combine capacity, reduced fuel consumption, reduced grain loss, longer harvesting window and perfect straw distribution. The Dual Stream™ Header attachment is available for the 25, 30, 35 and 41-foot Varifeed™ Grain Headers.