Are you Ready to Roll this season? We are, and want to make sure you are as well by offering 0% FINANCING on just about every new model tractor, hay and forage equipment and material handling equipment from New Holland. Or, you can choose CASH BACK in lieu of financing. So, what’s on your wish list? Now is the time to buy it, when you can purchase with no finance charges. Being ready for tomorrow starts today, so don’t wait. GET READY TO ROLL! The New Holland Ready to Roll Sales Event is underway now and ends June 30th, 2016. Click on the link to the left to see the full details, or stop in at any of our locations today!
Ready to Roll Example – Boomer 24:
We are offering a $500 REBATE PLUS 0% FINANCING for 84 months with payments as low as $138.00 on the 24 horsepower Boomer 24 compact tractor from New Holland. That’s SEVEN years with no finance charges! Handle all your chores quickly with the standard mid-PTO, independent rear 540-rpm, 9.2gpm hydraulics and a 3pt hitch to handle a variety of implements. You’ll like the easy two-pedal operation with cruise control, and the Boomer-Guard-Five five-year warranty. Being ready for tomorrow starts today!
Offer subject to CNH Industrial Capital credit approval. See your New Holland dealer for details and eligibility requirements. Depending on model, a down payment may be required. Offer good through June 30, 2016 at participating New Holland dealers in the United States. Taxes, freight, set-up, delivery, additional options or attachments not included in price. Offer subject to change or cancellation without notice.
Are you interested in owning a skid steer or compact tractor for getting work done easier around the house, such as hauling dirt or heavy rocks, hooking up a pull behind mower to cut large areas of land, pushing snow in the winter, or baling hay in the summer? We are going to be holding a New Holland Ride and Drive event Saturday, April 30th, to give anyone interested in owning a New Holland tractor a chance to get on the machine and become familiar with it.
Our staff will be on hand to offer assistance and expertise on the equipment on hand such as compact tractors with various attachments, skid steer loaders, hay equipment, utility vehicles and more! Here are the full details:
WHO: You! Everyone! (Event is open to the public)
WHAT: Event to test drive New Holland equipment
WHEN: April 30th 10am – 3pm
WHERE: 1417 E Lincoln Rd., Kokomo, IN 46902 (old Chrysler dealership)
WHY: New Holland has some very attractive deals going on now, in particular on New Holland compacts, such as 0% financing for 84 months (7 years!). With the pricing and discounts offered on the equipment available here, now is as good of a time as ever to consider purchasing a piece of New Holland equipment.
BONUS: Interested in solar? We will have staff on hand from our Ag Technologies location that will be available to speak with if you feel you are paying too much for your electric bill. Visit our Solar page for more information or call Ag Technologies ahead of time at 574-224-8324.
Call New Holland Greentown at 765-628-3305 for more details regarding this event!
The New Holland T4 UTILITY is an extension of the T4 Series tractor line, in a package designed specifically to provide the best value for your dollar as well as the power and comfort you expect from New Holland. T4 UTILITY tractors have just the right performance advantages you need to get all of your jobs done right.
New Holland commissioned the Prairie Agricultural Machinery Institute (PAMI) to conduct independent combine productivity comparison tests on Model Year 2015 New Holland CR9.90 Elevation and John Deere S690 combines.
PAMI has 40 years of experience testing harvesting equipment in various locations worldwide with a specialty in Western Canadian crops and conditions. The combines were tested in September 2015 in wheat and canola in Saskatchewan. Testing focused on harvesting productivity and fuel consumption efficiency.
Summary of Results:
New Holland has a 4% better harvesting productivity in wheat and up to 10% in canola.
The CR Elevation combine harvested 9% more grain per gallon of fuel and DEF than Deere S690.
There is an incredible difference of 13% gallons of fuel per acre in wheat and a 9% difference in the canola. On a 5,000-acre farm with 2,500 acres of wheat and 2,500 acres of canola, this would translate to a savings of up to $18,000 CAD per year (or approximately $13,000 USD) just by using the New Holland combine — a savings of $3.60 per acre!
New Holland’s MowMax™ true-modular disc cutterbars are the industry’s best. The legendary performance and proven reputation of the true-modular design backed by the 3-Year MowMax protection plan has been an integral part New Holland’s success in hay equipment.
To further that success, New Holland is now transitioning the extended internal cutterbar driveline protection into a 3-year New Holland factory limited warranty for the following model families:
H6000 Series mounted and trailed disc mowers
Discbine® side-pull and center-pivot disc mower-conditioners
Durabine® disc heads for Speedrower® self-propelled windrowers
Stop in at any of our locations for more information today!
Introducing the New Holland Certified Pre-Owned program, applicable to select New Holland tractors and combines. This program includes a comprehensive New Holland Protection Plan with Extended Powertrain Coverage** designed to help keep your equipment working properly beyond the manufacturers base warranty period. The New Holland Protection Plan covers all major engine and drivetrain components with a $0 deductible.* But best of all, the Certified Pre-Owned Program is a great opportunity to own New Holland with confidence and work it with pride.
Not just any Equipment can be called New Holland Certified Pre-Owned
It takes a special kind of tractor and combine- serviced by a special caliber of technician- to be eligible for New Holland certification. The Certified Pre-Owned program only applies to late model CR and CX Series combines and T8 and T9 series tractors, or CR/CX/T8/T9 models that are no more than five years old. Strict engine-hour requirements (maximum 1,500 hours for combines, 2,000 hours for tractors) are also enforced. Only then does each New Holland tractor and combine undergo a fluid analysis by factory-trained certified dealer’s service technicians plus a comprehensive inspection- 200+ point for combines and 100+ point for tractors. Equipment is meticulously examined and serviced- top to bottom- and any part that doesn’t meet New Holland’s rigorous standards is replaced with a genuine factory-authorized part. New Holland’s exhaustive certification process is your guarantee that you’ll work confidently with field-tested New Holland quality and durability for years.
Certified Pre-Owned Inspection
CR & CX Series Combines: 200+ point inspection
T8 & T9 Series Tractors: 100+ point inspection
New Holland tractors and combines that qualify for the Certified Pre-Owned program undergo a thorough, systematic inspection and reconditioning process. If a part is worn or defective, it’s replaced. Nothing is left to chance. Every piece of Certified Pre-Owned equipment undergoes an initial pre-certification check to ensure that it is in good operational condition and no problems exist. A fluid analysis of engine oil, coolant hydraulic fluid and diesel fuel is performed to determine the overall health of tractor or combine prior to inspection. This state-of-the-art fluid analysis identifies dirt, wear particles, fuel dilution and coolant contaminants that can cause catastrophic failure or significantly shorten equipment life. These risks are eliminated even before we start the rigorous inspection process. Following inspection results, any parts requirements are fulfilled using genuine New Holland parts or remanufactured parts. Certified New Holland technicians perform all necessary repairs to return the equipment to field- ready condition.A final verification- conducted only after successfully meeting all of the above analysis and inspection checkpoints- ensures that all repairs meet 100% New Holland standards and the equipment is ready for the Certified Pre-Owned designation.
New Holland Protection Plan Extended Powertrain Coverage*
New Holland Certified Pre-Owned equipment is backed by our New Holland Powertrain Protection Plan to cover your equipment beyond the New Holland base warranty period. The New Holland Powertrain Plan includes 12 month/2500 total engine Hours, whichever occurs first for T8 and T9 series tractors and 12 months/2000 total engine hours, whichever occurs first for CR and CX series combines and covers the following components: Engine Final Drives Transmission Rotor Drive Engine- Mounted PTO Header- Drive Components Gear Boxes (Combines) Hydrostatic Pump and Motor (Combines) Driveline (Tractors) There is a $0 deductible under the Certified Pre-Owned program. This provides you with peace of mind, dependable service and can even be transferred to a new owner at no charge.
*See the New Holland Protection Plan Contract for all terms and conditions, limitations and exclusions.
For more than 120 years New Holland has built a brand around a passion for farming and an enduring focus on innovation, which has allowed New Holland to shape agriculture’s history books.
New Holland’s industry landmarks, such as inventing the world’s self-knotting baler and first twin rotor combine, have helped establish the brand’s past while shaping their future. They strive to launch new products and technology in order to help you, our customers, operate more efficiently and to meet the ever-growing demands placed on the industry and the people who make a living by it.
This line of thinking has inspired New Holland’s newest campaign – Equipped for a New World.
We look forward to helping continue New Holland’s heritage and passion for continuing to innovate in order to help improve the lives of farmers all around the globe.
NEW New Holland Roll-Belt 450 and 460 round balers deliver industry-leading density now with 20% MORE CAPACITY!
Their proven Roll-Belt design uses heavy-duty steel rolls and short, puncture-resistant belts to create the densest, most weather-resistant bales in the industry. This allows for easier handling and decreased storage losses so you preserve more valuable hay every season.
We can tell you about the new choice in pickups that result in the 20% capacity increase-the ActiveSweep, SuperFeed and CropCutter pickups. Also, the EdgeWrap system features a new, lower loading height and a shorter net travel path for dependable wrapping every bale.
Start the season off right with a terrific deal on a NEW New Holland compact tractor. See us for full details about our 0% FINANCING FOR 7 YEARS program that runs now through March 31. Eligible models include Boomer Series 24, 33, 37, 41, 47, 46D, and 54D tractors and WORKMASTER Series 35/40, 33/37, 50, 60, and 70 tractors. Get the compact tractor you want and save. Stop in today!
With the My New Holland App you can login to the online community wherever you are. Effectively access your PLM and equipment management , receive notifications and locate your local dealer. Have it all always within reach, right in your smart phone. Download the app today from your iTunes or Google Play Store.
We use cookies to give you the best online experience. By agreeing you accept the use of cookies in accordance with our cookie policy.
When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.
For perfomance reasons we use Cloudflare as a CDN network. This saves a cookie "__cfduid" to apply security settings on a per-client basis. This cookie is strictly necessary for Cloudflare's security features and cannot be turned off.
__cfduid
These cookies allow us to count visits and traffic sources, so we can measure and improve the performance of our site.
